perf(worker): 持久化准入快照提升队列吞吐

原因：线上 P24 验收显示 Worker 在每轮准入前逐条恢复媒体、重算候选和查询 attempts，跨地域查询导致 48 个执行槽长期只能使用约 8 至 16 个。\n\n影响：任务首次排队时保存鉴权后的 admission scope 快照，Worker 单次批量读取并只刷新动态总容量；显式重新选路保留完整慢路径。验收模拟器改到非数据库专用 Worker 节点，运行期 85% 作为立即中止硬门禁，80% 继续作为容量认证目标。\n\n验证：Go 全量测试、go vet、govulncheck、真实 PostgreSQL 迁移与跨 Store 集成测试、ShellCheck、发布及验收脚本、OpenAPI、前端 lint/test/build、pnpm audit high、Compose 与 Kubernetes 渲染均通过。

README.md

@@ -168,7 +168,7 @@ AI_GATEWAY_DATABASE_URL=postgresql://easyai:easyai2025@localhost:5432/easyai_ai_
 
 如果现有 `easyai-pgvector` 没有把 `5432` 映射到宿主机，就需要补端口映射，或者把 AI Gateway 后端容器化后接入同一个 `easyai` Docker network。
 
-异步队列 worker 不使用固定业务并发。服务分别汇总启用平台模型和活跃用户组的有效 `concurrent` 策略，采用两者中更严格的集群容量，默认每 5 秒在线调整 River 执行容量。策略解析兼容历史 `platformLimits/modelLimits.max_concurrent_requests`，运行时统一转换为 `rules`。`AI_GATEWAY_ASYNC_WORKER_HARD_LIMIT` 默认 `2048`，限制策略推导出的集群目标；`AI_GATEWAY_ASYNC_WORKER_INSTANCE_HARD_LIMIT` 默认 `32`，按单 Worker 的内存安全容量限制实例分配，即使其他实例失活也不会突破。Worker 的 `AI_GATEWAY_DATABASE_MAX_CONNS` 必须高于实例执行容量，为心跳、选主、租约续期和健康检查保留连接；生产环境按每实例执行容量 `24` 配置连接池上限 `32`。`AI_GATEWAY_ASYNC_ADMISSION_MICROBATCH_SIZE` 默认 `8`，把短任务准入、容量租约和唯一 River job 合并为有界原子微批次，摊薄跨地域同步提交，同时禁止重新形成整窗大事务。`AI_GATEWAY_DATABASE_MIN_IDLE_CONNS` 控制启动预热连接数，默认 `0`，生产 K3s 配置为 `4`；`AI_GATEWAY_DATABASE_MAX_CONN_IDLE_SECONDS` 生产配置为 `300` 秒。平台模型和用户组的 PostgreSQL concurrency lease 仍是业务并发真值。可通过 `AI_GATEWAY_ASYNC_WORKER_REFRESH_INTERVAL_SECONDS` 调整刷新周期。
+异步队列 worker 不使用固定业务并发。服务分别汇总启用平台模型和活跃用户组的有效 `concurrent` 策略，采用两者中更严格的集群容量，默认每 5 秒在线调整 River 执行容量。策略解析兼容历史 `platformLimits/modelLimits.max_concurrent_requests`，运行时统一转换为 `rules`。`AI_GATEWAY_ASYNC_WORKER_HARD_LIMIT` 默认 `2048`，限制策略推导出的集群目标；`AI_GATEWAY_ASYNC_WORKER_INSTANCE_HARD_LIMIT` 默认 `32`，按单 Worker 的内存安全容量限制实例分配，即使其他实例失活也不会突破。Worker 的 `AI_GATEWAY_DATABASE_MAX_CONNS` 必须高于实例执行容量，为心跳、选主、租约续期和健康检查保留连接；生产环境按每实例执行容量 `24` 配置连接池上限 `32`。`AI_GATEWAY_ASYNC_ADMISSION_MICROBATCH_SIZE` 默认 `8`，把短任务准入、容量租约和唯一 River job 合并为有界原子微批次，摊薄跨地域同步提交，同时禁止重新形成整窗大事务。异步任务首次排队时会持久化已经鉴权的候选和 admission scope 快照；Worker 批量读取快照并仅刷新动态执行容量，只有显式重新选路才重新水化媒体和计算候选，避免队列越大、重复路由查询越多。`AI_GATEWAY_DATABASE_MIN_IDLE_CONNS` 控制启动预热连接数，默认 `0`，生产 K3s 配置为 `4`；`AI_GATEWAY_DATABASE_MAX_CONN_IDLE_SECONDS` 生产配置为 `300` 秒。平台模型和用户组的 PostgreSQL concurrency lease 仍是业务并发真值。可通过 `AI_GATEWAY_ASYNC_WORKER_REFRESH_INTERVAL_SECONDS` 调整刷新周期。
 
 ## 迁移原则
 

apps/api/internal/runner/admission.go

@@ -34,8 +34,8 @@ const (
 	asyncWorkerQueueLimit       = 10000
 	asyncWorkerMaxWaitSeconds   = 24 * 60 * 60
 	// The dispatcher scans enough FIFO entries to fill the certified 2 x P32
-	// capacity. Store admission commits each item independently so this scan
+	// capacity. Durable scope snapshots make this one bulk read; atomic commits
-	// size is never also a multi-task transaction size.
+	// remain bounded by the separately configured microbatch size.
 	asyncAdmissionBatchMax      = 64
 	acceptanceQueueLimit        = 10000
 	acceptanceQueueMaxWait      = 15 * 60
@@ -690,48 +690,80 @@ func (s *Service) SubmitAsyncTask(ctx context.Context, task store.GatewayTask) e
 	return nil
 }
 
-func (s *Service) dispatchWaitingAsyncTasks(ctx context.Context, tasks []store.GatewayTask) (bool, error) {
+func admissionInputFromSnapshot(admission store.TaskAdmission, workerCapacity int) store.TaskAdmissionInput {
-	if len(tasks) == 0 {
+	scopes := append([]store.AdmissionScope(nil), admission.Scopes...)
+	for index := range scopes {
+		if scopes[index].ScopeType == "worker_capacity" && scopes[index].ScopeKey == asyncWorkerCapacityScopeKey {
+			scopes[index].ConcurrentLimit = float64(workerCapacity)
+		}
+	}
+	return store.TaskAdmissionInput{
+		TaskID:          admission.TaskID,
+		PlatformID:      admission.PlatformID,
+		PlatformModelID: admission.PlatformModelID,
+		UserGroupID:     admission.UserGroupID,
+		QueueKey:        admission.QueueKey,
+		Mode:            admission.Mode,
+		Priority:        admission.Priority,
+		Scopes:          scopes,
+	}
+}
+
+func (s *Service) dispatchWaitingAsyncTasks(ctx context.Context, admissions []store.TaskAdmission) (bool, error) {
+	if len(admissions) == 0 {
 		return false, nil
 	}
-	inputs := make([]store.TaskAdmissionInput, 0, len(tasks))
+	workerCapacity, err := s.coordinationStore.ActiveWorkerCapacity(ctx)
-	tasksByID := make(map[string]store.GatewayTask, len(tasks))
-	for _, task := range tasks {
-		user := authUserFromTask(task)
-		current, err := s.store.GetTaskAdmission(ctx, task.ID)
-		if err != nil {
-			if errors.Is(err, pgx.ErrNoRows) {
-				continue
-			}
-			return false, err
-		}
-		plan, err := s.buildTaskAdmissionPlanForCurrentBinding(ctx, task, user, &current)
 	if err != nil {
 		return false, err
 	}
-		if !plan.Eligible {
+	if workerCapacity <= 0 {
-			if err := s.EnqueueAsyncTask(ctx, task); err != nil {
+		return true, nil
-				return false, err
 	}
-			continue
-		}
-		input, err := s.prepareTaskAdmissionInput(ctx, task, plan, "")
-		if err != nil {
-			return false, err
-		}
-		inputs = append(inputs, input)
-		tasksByID[task.ID] = task
-	}
-	saturated := false
 	microbatchSize := s.cfg.AsyncAdmissionMicrobatchSize
 	if microbatchSize <= 0 {
 		microbatchSize = 1
 	}
-	for start := 0; start < len(inputs) && !saturated; start += microbatchSize {
+	for start := 0; start < len(admissions); start += microbatchSize {
-		end := min(start+microbatchSize, len(inputs))
+		end := min(start+microbatchSize, len(admissions))
+		inputs := make([]store.TaskAdmissionInput, 0, end-start)
+		tasksByID := make(map[string]store.GatewayTask, end-start)
+		for _, admission := range admissions[start:end] {
+			if admission.ReselectRequestedAt.IsZero() && len(admission.Scopes) > 0 {
+				inputs = append(inputs, admissionInputFromSnapshot(admission, workerCapacity))
+				tasksByID[admission.TaskID] = store.GatewayTask{ID: admission.TaskID}
+				continue
+			}
+			task, loadErr := s.store.GetTask(ctx, admission.TaskID)
+			if loadErr != nil {
+				if errors.Is(loadErr, pgx.ErrNoRows) {
+					continue
+				}
+				return false, loadErr
+			}
+			plan, planErr := s.buildTaskAdmissionPlanForCurrentBinding(ctx, task, authUserFromTask(task), &admission)
+			if planErr != nil {
+				return false, planErr
+			}
+			if !plan.Eligible {
+				if enqueueErr := s.EnqueueAsyncTask(ctx, task); enqueueErr != nil {
+					return false, enqueueErr
+				}
+				continue
+			}
+			input := taskAdmissionInput(task, plan, "")
+			if _, rebindErr := s.store.RebindWaitingTaskAdmission(ctx, input); rebindErr != nil && !errors.Is(rebindErr, pgx.ErrNoRows) {
+				return false, rebindErr
+			}
+			inputs = append(inputs, input)
+			tasksByID[task.ID] = task
+		}
+		if len(inputs) == 0 {
+			continue
+		}
 		outcomes, err := s.store.TryTaskAdmissionAtomicBatchWithAdmittedHook(
 			ctx,
-			inputs[start:end],
+			inputs,
 			func(tx pgx.Tx, input store.TaskAdmissionInput) error {
 				task, ok := tasksByID[input.TaskID]
 				if !ok {
@@ -753,12 +785,11 @@ func (s *Service) dispatchWaitingAsyncTasks(ctx context.Context, tasks []store.G
 				return false, outcome.Err
 			}
 			if !outcome.Result.Admitted {
-				saturated = true
+				return true, nil
-				break
 			}
 		}
 	}
-	return saturated, nil
+	return false, nil
 }
 
 func (s *Service) cancelAsyncSubmissionIfDisconnected(ctx context.Context, taskID string) bool {
@@ -789,34 +820,17 @@ func (s *Service) dispatchWaitingAsyncAdmissions(ctx context.Context) {
 		}
 		for {
 			batchLimit := asyncAdmissionBatchLimit(s.cfg.AsyncWorkerHardLimit)
-			taskIDs, err := s.store.ListWaitingAsyncAdmissionTaskIDs(ctx, batchLimit)
+			admissions, err := s.store.ListWaitingAsyncAdmissions(ctx, batchLimit)
 			if err != nil {
 				s.logger.Warn("list waiting async admissions failed", "error", err)
 				break
 			}
-			if len(taskIDs) == 0 {
+			if len(admissions) == 0 {
 				break
 			}
-			tasks := make([]store.GatewayTask, 0, len(taskIDs))
+			saturated, err := s.dispatchWaitingAsyncTasks(ctx, admissions)
-			for _, taskID := range taskIDs {
-				task, err := s.store.GetTask(ctx, taskID)
 			if err != nil {
-					if !errors.Is(err, pgx.ErrNoRows) {
+				s.logger.Warn("dispatch waiting async admission batch failed", "tasks", len(admissions), "error", err)
-						s.logger.Warn("load waiting async task failed", "taskID", taskID, "error", err)
-					}
-					continue
-				}
-				if task.Status != "queued" {
-					continue
-				}
-				tasks = append(tasks, task)
-			}
-			if len(tasks) == 0 {
-				break
-			}
-			saturated, err := s.dispatchWaitingAsyncTasks(ctx, tasks)
-			if err != nil {
-				s.logger.Warn("dispatch waiting async admission batch failed", "tasks", len(tasks), "error", err)
 				break
 			}
 			if saturated {

apps/api/internal/runner/admission_test.go

@@ -2,10 +2,43 @@ package runner
 
 import (
 	"testing"
+	"time"
 
 	"github.com/easyai/easyai-ai-gateway/apps/api/internal/store"
 )
 
+func TestAdmissionInputFromSnapshotRefreshesWorkerCapacity(t *testing.T) {
+	admission := store.TaskAdmission{
+		TaskID:          "task-1",
+		PlatformID:      "platform-1",
+		PlatformModelID: "model-1",
+		UserGroupID:     "group-1",
+		QueueKey:        "queue-1",
+		Mode:            "async",
+		Priority:        7,
+		Scopes: []store.AdmissionScope{
+			{ScopeType: "platform_model", ScopeKey: "model-1", ConcurrentLimit: 10},
+			{ScopeType: "worker_capacity", ScopeKey: "global", ConcurrentLimit: 48},
+		},
+		ReselectRequestedAt: time.Time{},
+	}
+
+	input := admissionInputFromSnapshot(admission, 24)
+
+	if input.TaskID != admission.TaskID || input.PlatformModelID != admission.PlatformModelID || len(input.Scopes) != 2 {
+		t.Fatalf("unexpected admission input: %+v", input)
+	}
+	if input.Scopes[1].ConcurrentLimit != 24 {
+		t.Fatalf("worker capacity=%v, want 24", input.Scopes[1].ConcurrentLimit)
+	}
+	if input.Scopes[0].ConcurrentLimit != 10 {
+		t.Fatalf("business scope changed: %+v", input.Scopes[0])
+	}
+	if admission.Scopes[1].ConcurrentLimit != 48 {
+		t.Fatalf("snapshot was mutated: %+v", admission.Scopes[1])
+	}
+}
+
 func TestDistributedAdmissionModelTypeBoundary(t *testing.T) {
 	for _, modelType := range []string{
 		"image_generate", "image_edit", "image_analysis", "image_vectorize",

apps/api/internal/store/admission_queue.go

@@ -3,6 +3,7 @@ package store
 import (
 	"context"
 	"database/sql"
+	"encoding/json"
 	"errors"
 	"fmt"
 	"math"
@@ -77,6 +78,8 @@ type TaskAdmission struct {
 	AdmittedAt          time.Time
 	WaiterID            string
 	WaiterLeaseExpires  time.Time
+	Scopes              []AdmissionScope
+	ReselectRequestedAt time.Time
 }
 
 type TaskAdmissionResult struct {
@@ -697,6 +700,10 @@ func (s *Store) rebindWaitingTaskAdmissionOnce(ctx context.Context, input TaskAd
 		return TaskAdmission{}, admissionErr
 	}
 	deadline := admissionDeadline(scopes)
+	scopeSnapshot, err := json.Marshal(scopes)
+	if err != nil {
+		return TaskAdmission{}, fmt.Errorf("marshal rebound task admission scopes: %w", err)
+	}
 	row := tx.QueryRow(ctx, `
 UPDATE gateway_task_admissions
 SET platform_id = $2::uuid,
@@ -704,6 +711,7 @@ SET platform_id = $2::uuid,
     user_group_id = NULLIF($4, '')::uuid,
     queue_key = $5,
     wait_deadline_at = LEAST(wait_deadline_at, $6),
+    scope_snapshot = $7::jsonb,
     reselect_requested_at = NULL,
     updated_at = now()
 WHERE task_id = $1::uuid
@@ -711,13 +719,15 @@ WHERE task_id = $1::uuid
 RETURNING task_id::text, platform_id::text, platform_model_id::text,
           COALESCE(user_group_id::text, ''), queue_key, mode, status, priority,
           enqueued_at, wait_deadline_at, admitted_at,
-          COALESCE(waiter_id, ''), waiter_lease_expires_at`,
+          COALESCE(waiter_id, ''), waiter_lease_expires_at,
+          scope_snapshot, reselect_requested_at`,
 		input.TaskID,
 		input.PlatformID,
 		input.PlatformModelID,
 		input.UserGroupID,
 		input.QueueKey,
 		deadline,
+		scopeSnapshot,
 	)
 	migrated, err := scanTaskAdmission(row)
 	if err != nil {
@@ -753,6 +763,10 @@ WHERE task_id = $1::uuid
 	if input.Mode == "sync" {
 		waiterLease = time.Now().Add(admissionWaiterLeaseTTL)
 	}
+	scopeSnapshot, err := json.Marshal(normalizedAdmissionScopes(input.Scopes))
+	if err != nil {
+		return TaskAdmission{}, fmt.Errorf("marshal reset task admission scopes: %w", err)
+	}
 	row := tx.QueryRow(ctx, `
 UPDATE gateway_task_admissions
 SET status = 'waiting',
@@ -764,12 +778,14 @@ SET status = 'waiting',
     wait_deadline_at = LEAST(wait_deadline_at, $6),
     waiter_id = NULLIF($7, ''),
     waiter_lease_expires_at = $8,
+    scope_snapshot = $9::jsonb,
     updated_at = now()
 WHERE task_id = $1::uuid
 RETURNING task_id::text, platform_id::text, platform_model_id::text,
           COALESCE(user_group_id::text, ''), queue_key, mode, status, priority,
           enqueued_at, wait_deadline_at, admitted_at,
-          COALESCE(waiter_id, ''), waiter_lease_expires_at`,
+          COALESCE(waiter_id, ''), waiter_lease_expires_at,
+          scope_snapshot, reselect_requested_at`,
 		input.TaskID,
 		input.PlatformID,
 		input.PlatformModelID,
@@ -778,6 +794,7 @@ RETURNING task_id::text, platform_id::text, platform_model_id::text,
 		admissionDeadline(input.Scopes),
 		strings.TrimSpace(input.WaiterID),
 		waiterLease,
+		scopeSnapshot,
 	)
 	return scanTaskAdmission(row)
 }
@@ -933,6 +950,62 @@ LIMIT $1`, limit)
 	return taskIDs, rows.Err()
 }
 
+// ListWaitingAsyncAdmissions returns the durable routing and admission-scope
+// snapshots needed by the Worker dispatcher in one round trip. Normal queued
+// tasks must not be fully rehydrated and routed again merely to reserve an
+// execution slot; only rows explicitly marked for reselection take that slower
+// path in the runner.
+func (s *Store) ListWaitingAsyncAdmissions(ctx context.Context, limit int) ([]TaskAdmission, error) {
+	if limit <= 0 || limit > 1000 {
+		limit = 100
+	}
+	rows, err := s.pool.Query(ctx, `
+SELECT admission.task_id::text, admission.platform_id::text, admission.platform_model_id::text,
+       COALESCE(admission.user_group_id::text, ''), admission.queue_key, admission.mode,
+       admission.status, admission.priority, admission.enqueued_at, admission.wait_deadline_at,
+       admission.admitted_at, COALESCE(admission.waiter_id, ''), admission.waiter_lease_expires_at,
+       admission.scope_snapshot, admission.reselect_requested_at
+FROM gateway_task_admissions admission
+JOIN gateway_tasks task ON task.id = admission.task_id
+LEFT JOIN river_job job ON job.id = task.river_job_id
+WHERE admission.mode = 'async'
+  AND task.status = 'queued'
+  AND task.next_run_at <= now()
+  AND (
+    admission.status = 'waiting'
+    OR (
+      admission.status = 'admitted'
+      AND NOT EXISTS (
+        SELECT 1
+        FROM gateway_concurrency_leases lease
+        WHERE lease.task_id = admission.task_id
+          AND lease.released_at IS NULL
+          AND lease.expires_at > now()
+      )
+    )
+  )
+  AND (
+    task.river_job_id IS NULL
+    OR job.id IS NULL
+    OR job.state <> 'running'
+  )
+ORDER BY admission.priority ASC, admission.enqueued_at ASC, admission.task_id ASC
+LIMIT $1`, limit)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	admissions := make([]TaskAdmission, 0, limit)
+	for rows.Next() {
+		admission, scanErr := scanTaskAdmission(rows)
+		if scanErr != nil {
+			return nil, scanErr
+		}
+		admissions = append(admissions, admission)
+	}
+	return admissions, rows.Err()
+}
+
 // ListWaitingTaskAdmissionIDs returns one FIFO leader for every independent
 // platform-model queue, additionally requiring the task to lead its user-group
 // queue when one exists. It is used after capacity is released so API
@@ -1323,6 +1396,10 @@ func queueRetryAfter(next time.Time) time.Duration {
 
 func insertTaskAdmissionTx(ctx context.Context, tx pgx.Tx, input TaskAdmissionInput, deadline time.Time) (TaskAdmission, error) {
 	waiterID := strings.TrimSpace(input.WaiterID)
+	scopeSnapshot, err := json.Marshal(normalizedAdmissionScopes(input.Scopes))
+	if err != nil {
+		return TaskAdmission{}, fmt.Errorf("marshal task admission scopes: %w", err)
+	}
 	var waiterLease any
 	if input.Mode == "sync" {
 		waiterLease = time.Now().Add(admissionWaiterLeaseTTL)
@@ -1330,22 +1407,27 @@ func insertTaskAdmissionTx(ctx context.Context, tx pgx.Tx, input TaskAdmissionIn
 	row := tx.QueryRow(ctx, `
 INSERT INTO gateway_task_admissions (
   task_id, platform_id, platform_model_id, user_group_id, queue_key, mode, status,
-  priority, wait_deadline_at, waiter_id, waiter_lease_expires_at
+  priority, wait_deadline_at, waiter_id, waiter_lease_expires_at, scope_snapshot
 )
 VALUES (
   $1::uuid, $2::uuid, $3::uuid, NULLIF($4, '')::uuid, $5, $6, 'waiting',
-  $7, $8, NULLIF($9, ''), $10
+  $7, $8, NULLIF($9, ''), $10, $11::jsonb
 )
 ON CONFLICT (task_id) DO UPDATE
 SET waiter_id = CASE WHEN gateway_task_admissions.mode = 'sync' THEN EXCLUDED.waiter_id ELSE gateway_task_admissions.waiter_id END,
     waiter_lease_expires_at = CASE WHEN gateway_task_admissions.mode = 'sync' THEN EXCLUDED.waiter_lease_expires_at ELSE gateway_task_admissions.waiter_lease_expires_at END,
+    scope_snapshot = CASE
+      WHEN gateway_task_admissions.scope_snapshot IS NULL OR gateway_task_admissions.scope_snapshot = '[]'::jsonb THEN EXCLUDED.scope_snapshot
+      ELSE gateway_task_admissions.scope_snapshot
+    END,
     updated_at = now()
 RETURNING task_id::text, platform_id::text, platform_model_id::text,
           COALESCE(user_group_id::text, ''), queue_key, mode, status, priority,
           enqueued_at, wait_deadline_at, admitted_at,
-          COALESCE(waiter_id, ''), waiter_lease_expires_at`,
+          COALESCE(waiter_id, ''), waiter_lease_expires_at,
+          scope_snapshot, reselect_requested_at`,
 		input.TaskID, input.PlatformID, input.PlatformModelID, input.UserGroupID,
-		input.QueueKey, input.Mode, input.Priority, deadline, waiterID, waiterLease)
+		input.QueueKey, input.Mode, input.Priority, deadline, waiterID, waiterLease, scopeSnapshot)
 	return scanTaskAdmission(row)
 }
 
@@ -1361,7 +1443,8 @@ WHERE task_id = $1::uuid
 RETURNING task_id::text, platform_id::text, platform_model_id::text,
           COALESCE(user_group_id::text, ''), queue_key, mode, status, priority,
           enqueued_at, wait_deadline_at, admitted_at,
-          COALESCE(waiter_id, ''), waiter_lease_expires_at`,
+          COALESCE(waiter_id, ''), waiter_lease_expires_at,
+          scope_snapshot, reselect_requested_at`,
 		taskID, waiterID, admissionWaiterLeaseTTL.String())
 	return scanTaskAdmission(row)
 }
@@ -1377,7 +1460,8 @@ WHERE task_id = $1::uuid AND status = 'waiting'
 RETURNING task_id::text, platform_id::text, platform_model_id::text,
           COALESCE(user_group_id::text, ''), queue_key, mode, status, priority,
           enqueued_at, wait_deadline_at, admitted_at,
-          COALESCE(waiter_id, ''), waiter_lease_expires_at`,
+          COALESCE(waiter_id, ''), waiter_lease_expires_at,
+          scope_snapshot, reselect_requested_at`,
 		taskID)
 	return scanTaskAdmission(row)
 }
@@ -1395,7 +1479,8 @@ func loadTaskAdmission(ctx context.Context, q admissionQuerier, taskID string) (
 SELECT task_id::text, platform_id::text, platform_model_id::text,
        COALESCE(user_group_id::text, ''), queue_key, mode, status, priority,
        enqueued_at, wait_deadline_at, admitted_at,
-       COALESCE(waiter_id, ''), waiter_lease_expires_at
+       COALESCE(waiter_id, ''), waiter_lease_expires_at,
+       scope_snapshot, reselect_requested_at
 FROM gateway_task_admissions
 WHERE task_id = $1::uuid`, taskID)
 	admission, err := scanTaskAdmission(row)
@@ -1409,6 +1494,8 @@ func scanTaskAdmission(row pgx.Row) (TaskAdmission, error) {
 	var admission TaskAdmission
 	var admittedAt sql.NullTime
 	var waiterLeaseExpires sql.NullTime
+	var reselectRequestedAt sql.NullTime
+	var scopeSnapshot []byte
 	err := row.Scan(
 		&admission.TaskID,
 		&admission.PlatformID,
@@ -1423,6 +1510,8 @@ func scanTaskAdmission(row pgx.Row) (TaskAdmission, error) {
 		&admittedAt,
 		&admission.WaiterID,
 		&waiterLeaseExpires,
+		&scopeSnapshot,
+		&reselectRequestedAt,
 	)
 	if admittedAt.Valid {
 		admission.AdmittedAt = admittedAt.Time
@@ -1430,6 +1519,14 @@ func scanTaskAdmission(row pgx.Row) (TaskAdmission, error) {
 	if waiterLeaseExpires.Valid {
 		admission.WaiterLeaseExpires = waiterLeaseExpires.Time
 	}
+	if reselectRequestedAt.Valid {
+		admission.ReselectRequestedAt = reselectRequestedAt.Time
+	}
+	if err == nil && len(scopeSnapshot) > 0 {
+		if unmarshalErr := json.Unmarshal(scopeSnapshot, &admission.Scopes); unmarshalErr != nil {
+			return TaskAdmission{}, fmt.Errorf("unmarshal task admission scopes: %w", unmarshalErr)
+		}
+	}
 	return admission, err
 }
 

apps/api/internal/store/admission_queue_integration_test.go

@@ -434,6 +434,23 @@ WHERE id = $1::uuid`, queuedAtomicTask.ID, queuedSyntheticRiverJobID)
 	if err != nil || queuedAdmission.Status != "waiting" {
 		t.Fatalf("atomic queued admission=%+v err=%v, want waiting", queuedAdmission, err)
 	}
+	if len(queuedAdmission.Scopes) == 0 {
+		t.Fatal("queued admission did not persist its scope snapshot")
+	}
+	waitingAdmissionSnapshots, err := first.ListWaitingAsyncAdmissions(ctx, 1000)
+	if err != nil {
+		t.Fatalf("list waiting async admission snapshots: %v", err)
+	}
+	var listedSnapshot *TaskAdmission
+	for index := range waitingAdmissionSnapshots {
+		if waitingAdmissionSnapshots[index].TaskID == queuedAtomicTask.ID {
+			listedSnapshot = &waitingAdmissionSnapshots[index]
+			break
+		}
+	}
+	if listedSnapshot == nil || len(listedSnapshot.Scopes) != len(queuedAdmission.Scopes) {
+		t.Fatalf("listed admission snapshot=%+v, want %d scopes", listedSnapshot, len(queuedAdmission.Scopes))
+	}
 	var riverJobID int64
 	if err := first.pool.QueryRow(ctx, `
 SELECT

apps/api/migrations/0100_task_admission_scope_snapshot.sql

@@ -0,0 +1,9 @@
+ALTER TABLE gateway_task_admissions
+  ADD COLUMN IF NOT EXISTS scope_snapshot jsonb;
+
+ALTER TABLE gateway_task_admissions
+  ADD CONSTRAINT gateway_task_admissions_scope_snapshot_array_check
+  CHECK (scope_snapshot IS NULL OR jsonb_typeof(scope_snapshot) = 'array') NOT VALID;
+
+ALTER TABLE gateway_task_admissions
+  VALIDATE CONSTRAINT gateway_task_admissions_scope_snapshot_array_check;

deploy/kubernetes/acceptance/protocol-emulator.yaml

@@ -18,7 +18,11 @@ spec:
         app.kubernetes.io/part-of: easyai-ai-gateway
     spec:
       nodeSelector:
-        easyai.io/site: ningbo
+        # Keep the memory-heavy protocol emulator away from PostgreSQL and
+        # control-plane nodes. Any future dedicated Worker node can host it
+        # without changing this manifest.
+        easyai.io/worker: "true"
+        easyai.io/database: "false"
         easyai.io/workload: "true"
       securityContext:
         runAsNonRoot: true

docs/operations/production-acceptance.md

@@ -86,26 +86,24 @@ AI_GATEWAY_WORKER_REPLICAS_NINGBO
 AI_GATEWAY_WORKER_REPLICAS_HONGKONG
 ```
 
-`AI_GATEWAY_WORKER_REPLICAS_*` 是发布工具配置，不会传入容器。容量档位先固定宁波、香港
+`AI_GATEWAY_WORKER_REPLICAS_*` 是发布工具配置，不会传入容器。当前生产基线在香港站点运行
-各一个 2 GiB Worker，再按实时内存、CPU 和 PostgreSQL 预算验证 `1+2`、条件允许时的
+两个 2 GiB Worker，其中一个位于香港控制面节点，另一个位于带
-`2+2`，以及安全 drain 回到 `1+1`：
+`easyai.io/worker=true,easyai.io/database=false` 标签的专用 Worker 节点；宁波混部节点不承载
-
+Worker。后续副本上限继续按实时内存、CPU 和 PostgreSQL 预算计算，不按站点或代码写死：
-生产基线使用两个独立物理 Worker 节点：第二台宁波服务器承载 `easyai-worker-ningbo`，
-香港服务器承载 `easyai-worker-hongkong`。两个 Deployment 都要求节点带
-`easyai.io/worker=true`，原宁波混部节点不再承载 Worker。默认验收配置为：
 
 ```bash
-AI_GATEWAY_ACCEPTANCE_BASE_REPLICAS_NINGBO=1
+AI_GATEWAY_ACCEPTANCE_BASE_REPLICAS_NINGBO=0
-AI_GATEWAY_ACCEPTANCE_BASE_REPLICAS_HONGKONG=1
+AI_GATEWAY_ACCEPTANCE_BASE_REPLICAS_HONGKONG=2
-AI_GATEWAY_ACCEPTANCE_AUTOSCALING_MIN_REPLICAS_NINGBO=1
+AI_GATEWAY_ACCEPTANCE_AUTOSCALING_MIN_REPLICAS_NINGBO=0
 AI_GATEWAY_ACCEPTANCE_AUTOSCALING_MIN_REPLICAS_HONGKONG=1
-AI_GATEWAY_ACCEPTANCE_AUTOSCALING_MAX_REPLICAS_NINGBO=2
+AI_GATEWAY_ACCEPTANCE_AUTOSCALING_MAX_REPLICAS_NINGBO=0
 AI_GATEWAY_ACCEPTANCE_AUTOSCALING_MAX_REPLICAS_HONGKONG=2
 ```
 
-资源前置门禁和容量控制器只采样 `easyai.io/worker=true` 节点，避免把原宁波混部节点的
+资源前置门禁和容量控制器只把已启用站点的 `easyai.io/worker=true` 节点计入弹性预算，
-可分配资源错误计入弹性上限。每站点能否升到两个副本仍由实测 RSS、CPU 和 PostgreSQL
+协议模拟器优先固定到 `easyai.io/worker=true,easyai.io/database=false` 的专用节点，避免它与
-连接预算决定，不因新增节点而预先承诺。
+宁波主库和控制面争抢内存。每站点能否增加副本仍由实测 RSS、CPU 和 PostgreSQL 连接预算
+决定，不因新增节点而预先承诺。
 
 | 档位 | 单实例执行槽 | 数据库池 | 媒体并发 | 全局执行槽 |
 |---|---:|---:|---:|---:|
@@ -156,7 +154,7 @@ PNG 并通过验收 Key 上传到 Gateway。生产快照默认在已部署的 AP
 编辑模型，以及 `omni_video.max_images >= 9` 的视频模型并优先 Seedance 2.0/fast。
 验收组按 release SHA 隔离；历史 Run 的用户和分片不会被清理或复用到新 release，本次需要的
 分片及其 API Key 会幂等迁移到当前 release 的专属组。
-宁波 15 分钟预热内存门槛默认 65%，可用
+已启用 Worker 节点的 15 分钟预热内存门槛默认 65%，可用
 `AI_GATEWAY_ACCEPTANCE_NODE_MEMORY_PRECONDITION_PERCENT` 在 50–79% 之间显式调整；报告必须记录
 实际门槛，运行期 80%目标和 85%硬门禁不随之放宽。
 

scripts/cluster/run-production-acceptance.sh

@@ -2630,7 +2630,7 @@ pressure_row_live_gate_reason() {
     $4 >= 900 {print "oldest_wait_seconds=" $4 " limit=900"; exit}
     $6 <= 0 {print "postgres_max_connections_unavailable"; exit}
     $5 * 4 >= $6 * 3 {print "postgres_connections=" $5 " limit_75_percent_of=" $6; exit}
-    $7 >= 80 {print "node_memory_percent=" $7 " limit=80"; exit}
+    $7 >= 85 {print "node_memory_percent=" $7 " hard_limit=85"; exit}
     $8 >= 1536 {print "api_pod_memory_mib=" $8 " limit=1536"; exit}
     $14 > 0 {print "lease_renewal_failures=" $14; exit}
     $15 > 0 {print "lease_lost=" $15; exit}

tests/release/production-acceptance-script-test.sh

@@ -108,10 +108,12 @@ grep -Fq '# target_host root@hongkong-worker-2.invalid' <<<"$metrics"
 [[ $(metric_max test_metric <<<"$metrics") == 1 ]]
 [[ $(metric_sum test_metric <<<"$metrics") == 2 ]]
 
-passing_pressure_row='2026-08-01T00:00:00Z,0,0,899,149,200,79,1535,0,32,32,0,0,0,0,2,48,0,8,8,0,0,0,16,16,0,0,1535,100'
+passing_pressure_row='2026-08-01T00:00:00Z,0,0,899,149,200,84,1535,0,32,32,0,0,0,0,2,48,0,8,8,0,0,0,16,16,0,0,1535,100'
 pressure_row_passes_live_gates "$passing_pressure_row"
 [[ $(pressure_row_live_gate_reason '2026-08-01T00:00:00Z,0,0,900,149,200,79,1535,0,32,32,0,0,0,0,2,48,0,8,8,0,0,0,16,16,0,0,1535,100') == \
   'oldest_wait_seconds=900 limit=900' ]]
+[[ $(pressure_row_live_gate_reason '2026-08-01T00:00:00Z,0,0,899,149,200,85,1535,0,32,32,0,0,0,0,2,48,0,8,8,0,0,0,16,16,0,0,1535,100') == \
+  'node_memory_percent=85 hard_limit=85' ]]
 
 for failed_pressure_row in \
   '2026-08-01T00:00:00Z,0,0,901,149,200,79,1535,0,32,32,0,0,0,0,2,48,0,8,8,0,0,0,16,16,0,0,1535,100' \