comfyanonymous
838bcaa395
Nodes to properly use the SDV img2vid checkpoint.
...
The img2vid model is conditioned on clip vision output only which means
there's no CLIP model which is why I added a ImageOnlyCheckpointLoader to
load it. Note that the unClipCheckpointLoader can also load it because it
also has a CLIP_VISION output.
SDV_img2vid_Conditioning is the node used to pass the right conditioning
to the img2vid model.
VideoLinearCFGGuidance applies a linearly decreasing CFG scale to each
video frame from the cfg set in the sampler node to min_cfg.
SDV_img2vid_Conditioning can be found in conditioning->video_models
ImageOnlyCheckpointLoader can be found in loaders->video_models
VideoLinearCFGGuidance can be found in sampling->video_models
2023-11-23 19:48:49 -05:00
comfyanonymous
eeceef948d
Add taesd and taesdxl to VAELoader node.
...
They will show up if both the taesd_encoder and taesd_decoder or taesdxl
model files are present in the models/vae_approx directory.
2023-11-21 12:54:19 -05:00
comfyanonymous
e07971cb86
Add ImageCrop node.
2023-11-18 04:44:17 -05:00
comfyanonymous
d385b8a68d
Add PatchModelAddDownscale (Kohya Deep Shrink) node.
...
By adding a downscale to the unet in the first timesteps this node lets
you generate images at higher resolutions with less consistency issues.
2023-11-16 13:25:46 -05:00
comfyanonymous
5514c4b8ce
Invert the start and end percentages in the code.
...
This doesn't affect how percentages behave in the frontend but breaks
things if you relied on them in the backend.
percent_to_sigma goes from 0 to 1.0 instead of 1.0 to 0 for less confusion.
Make percent 0 return an extremely large sigma and percent 1.0 return a
zero one to fix imprecision.
2023-11-16 04:23:44 -05:00
comfyanonymous
8d8c22bba7
Lower cfg step to 0.1 in sampler nodes.
2023-11-09 17:35:17 -05:00
comfyanonymous
4d21372152
Add: advanced->model->ModelSamplingDiscrete node.
...
This allows changing the sampling parameters of the model (eps or vpred)
or set the model to use zsnr.
2023-11-07 03:28:53 -05:00
comfyanonymous
1d1621b03d
HyperTile node, can be found in: _for_testing->HyperTile
2023-10-21 05:16:38 -04:00
comfyanonymous
459787f78f
Make VAE code closer to sgm.
2023-10-17 15:18:51 -04:00
comfyanonymous
b1e0568f52
Make clear that the old CheckpointLoader is deprecated.
2023-10-15 02:22:22 -04:00
comfyanonymous
18e4504de7
Pull some small changes from the other repo.
2023-10-11 20:38:48 -04:00
comfyanonymous
241f3fd93a
Change a few things in #1578 .
2023-10-04 15:43:41 -04:00
MoonRide303
1c06c81343
Change channel type to MASK (reduced redundancy, increased usability)
2023-10-04 19:04:52 +02:00
MoonRide303
a138e66970
Added support for Porter-Duff image compositing
2023-10-04 19:04:48 +02:00
comfyanonymous
08f555bf47
Refactor with code from comment of #1588
2023-10-02 17:26:59 -04:00
comfyanonymous
75a26ed5ee
Add a SamplerCustom Node.
...
This node takes a list of sigmas and a sampler object as input.
This lets people easily implement custom schedulers and samplers as nodes.
More nodes will be added to it in the future.
2023-09-27 22:21:18 -04:00
comfyanonymous
de1158883e
Refactor sampling related code.
2023-09-27 16:45:22 -04:00
comfyanonymous
909338c833
Make LoadImage and LoadImageMask return masks in batch format.
2023-09-26 02:56:40 -04:00
comfyanonymous
5d97c6af3c
Merge branch 'proportional-scale' of https://github.com/jn-jairo/ComfyUI
2023-09-25 12:39:53 -04:00
comfyanonymous
528589def5
1024 wasn't enough.
2023-09-25 01:46:44 -04:00
comfyanonymous
1cdafa2f28
Increase maximum batch sizes of empty image nodes.
2023-09-25 01:22:37 -04:00
comfyanonymous
70c6e04ae4
Fix typo.
2023-09-24 13:27:57 -04:00
Jairo Correa
9c57318856
Proportional scale latent and image
2023-09-24 12:08:54 -03:00
comfyanonymous
a1006587ec
Implement FreeU: Free Lunch in Diffusion U-Net node.
...
_for_testing->FreeU
2023-09-23 00:56:09 -04:00
comfyanonymous
1108b51328
Add some nodes to add, subtract and multiply latents.
2023-09-21 22:23:01 -04:00
comfyanonymous
2e9b60dee6
Increase range of lora strengths.
2023-09-20 17:58:54 -04:00
MoonRide303
20d8e318c5
Added support for lanczos scaling
2023-09-19 10:40:38 +02:00
comfyanonymous
5fed13c849
Lower the minimum resolution of EmptyLatentImage.
2023-09-18 16:20:03 -04:00
comfyanonymous
97a7c7b43b
Nodes can now control the rounding in the UI.
2023-09-17 12:49:06 -04:00
comfyanonymous
b58288668f
Add a ConditioningSetAreaPercentage node.
2023-09-06 03:28:27 -04:00
comfyanonymous
b0b63eb8a3
Only return tuple of 3 args in CheckpointLoaderSimple.
2023-09-02 03:34:57 -04:00
comfyanonymous
778c290a67
Fix VAEDecodeTiled minimum.
2023-08-31 14:26:16 -04:00
comfyanonymous
845faf8e51
Clean up DiffusersLoader node.
2023-08-30 12:57:07 -04:00
comfyanonymous
c019939b9e
Use the same units for tile size in VAEDecodeTiled and VAEEncodeTiled.
2023-08-29 01:51:35 -04:00
BVH
719f132e04
Reduce min tile size for encode
2023-08-28 22:39:09 +05:30
BVH
c5bd14012a
Make tile size in Tiled VAE encode/decode user configurable
2023-08-28 19:57:22 +05:30
comfyanonymous
a2602fc4f9
Move controlnet code to comfy/controlnet.py
2023-08-25 17:33:04 -04:00
comfyanonymous
e26b2b6fd3
Don't hardcode node names for image upload widget.
2023-08-22 19:41:49 -04:00
pythongosssss
baf88698e1
Allow loading js extensions without copying to /web folder
2023-08-20 19:55:48 +01:00
comfyanonymous
9a0b369956
Add an EmptyImage node.
...
TODO: implement color picker in the frontend.
2023-08-15 17:53:10 -04:00
comfyanonymous
1e9b164275
Add node to batch images together.
2023-08-14 20:23:38 -04:00
comfyanonymous
736e2e8f49
CLIPVisionEncode can now encode multiple images.
2023-08-14 16:54:05 -04:00
comfyanonymous
3063968590
Make LatentBlend more consistent with other nodes.
2023-08-04 02:51:28 -04:00
FuamiCake
668135abb4
Add LatentBlend node, allowing for blending between two Latent inputs.
2023-08-01 01:23:14 -05:00
FuamiCake
bc6c210a8e
SaveLatent reports its outputs so they are visible to API
2023-07-30 16:36:55 -05:00
comfyanonymous
8088be4f2e
Add --disable-metadata argument to disable saving metadata in files.
2023-07-28 12:31:41 -04:00
comfyanonymous
2c22729cec
Start is now 0.0 and end is now 1.0 for the timestep ranges.
2023-07-24 18:38:17 -04:00
comfyanonymous
857a80b857
ControlNetApplyAdvanced can now define when controlnet gets applied.
2023-07-24 17:50:49 -04:00
comfyanonymous
0ed4637a7a
Add a ControlNetApplyAdvanced node.
...
The controlnet can be applied to the positive or negative prompt only by
connecting it correctly.
2023-07-24 13:35:20 -04:00
comfyanonymous
156b047427
Add a way to set which range of timesteps the cond gets applied to.
2023-07-24 09:25:02 -04:00
